冲孔不锈钢板

首页 > 产品中心 > 冲孔网 > 冲孔不锈钢板 > Micro Hole Stainless Steel Etched Mesh

Micro Hole Stainless Steel Etched Mesh

Etching, commonly referred to as photochemical etching, refers to the removal of the protective film in the area to be etched after exposure, plate making and development, and the contact with chemical solution during etching to achieve the effect of dissolving corrosion and forming concave convex or hollow molding. Etching processing technology can be divided into wet etching and dry etching. Wet etching uses the chemical reaction between a specific solution and the film to remove the part of the film that is not covered by photoresist to achieve the purpose of etching. This etching method is also called wet etching. The focus here is on wet etching. Etching can produce thin metal parts quickly and cheaply. Some processing techniques may not be suitable for processing thin metal parts.


立即咨询

Micro Hole Stainless Steel Etched Mesh

YILIDA has a senior research and development team, which constantly innovates in the precision of micro hole punching. Machinable materials such as SUS304/201/316/410/430. Machinable materials have a thickness of 0.03-0.8MM, a tolerance of ± 0.01MM, and a flatness of ≤ 0.2. After the completion of product processing, it has gone through 24 inspection processes, strictly controlling every detail, and the inspection qualification rate is up to 98%, with guaranteed quality. Proofing cycle: 3-5 days Product detection: anime, imager.


Features

1. High machining accuracy without burrs

2. Realize metal half carving, add LOGO and brand production

3. The product is not deformed

4. There are no restrictions on complex patterns and graphics with arbitrary geometric beginnings

5. Short production time

联系我们

邮箱 : master04@wiremesh-yg.cn

电话:15031803385

座机: 0318-7565001

地址:河北省安平县丝网工业园

Copyright © 安平县亿利达金属网业有限公司版权所有 | 网站地图 | 技术支持: Reanod 备案号:冀ICP备09031885号-6